Suspension-assisted manipulators have been widely used in modern industry due to their suspension technology and labor-saving operation. The following are the specific steps and precautions for use to help operators quickly and proficiently master the key points of operation.

1. Preparation before use

• Equipment inspection?: Before use, ensure that all parts of the robot are tightened and not loose, especially the key connection parts. Check the air source pressure to ensure that it is stable and meets the equipment requirements.
• Read the operating manual?: Before initial use or operation, carefully read the operating manual of the device to understand its basic functions, operating procedures, and safety precautions.

2. Fixture selection and installation

• Choose the appropriate gripper?: Choose the appropriate gripper according to the shape, size and weight of the object to be transported. Make sure the gripper is firmly and reliably installed on the manipulator to avoid loosening or falling off during transportation.

3. Start the device and enter the suspended state

• Start the suspension system?: Start the robot through the control panel or remote control and wait for it to enter the suspension state. At this time, the equipment will allow the operator to easily push and control it through the suspension system, reducing the impact of gravity on handling.

4. Operation and handling

• Push-pull handle for control?: In the suspended state, the operator can easily control the movement direction of the manipulator by pushing or pulling the handle. Since the manipulator is not restricted by gravity, the operator can complete most handling tasks without any effort.
• Keep the object stable?: During the moving process, keep the object stable and avoid moving too fast or colliding with surrounding objects. If the object is large, pay special attention to its center of gravity to prevent it from tilting.

5. Place objects

• Release the gripper?: After reaching the target position, use the control panel or remote control to control the manipulator to release the gripper to ensure that the object is placed down smoothly. Avoid placing the object down too quickly to avoid damaging the object or the gripper.

6. End of operation and maintenance

• Shut down the equipment?: After the operation is completed, shut down the suspended power manipulator in time to ensure that the equipment is in a closed and safe state.
• Daily maintenance?: Clean and maintain the robot regularly to ensure that the equipment is in the best operating condition. Maintenance can not only extend the life of the equipment, but also improve work efficiency and safety.

7. Safety precautions

• Strictly abide by the operating procedures?: During use, the operator should always abide by the operating procedures and safety guidelines of the equipment to avoid accidents caused by misoperation.
• Regular maintenance?: To keep the equipment functioning properly, it is recommended to develop a regular maintenance and inspection plan, replace or repair worn parts in a timely manner, and ensure the long-term reliability of the equipment.

in conclusion

The suspension-assisted manipulator has brought great convenience to industrial production with its unique suspension technology and labor-saving operation. By mastering the correct operation methods and maintenance skills, operators can give full play to its performance advantages, improve production efficiency, and ensure the safety of operation and the service life of the equipment.